Orthopedic Cannulated Bone Drill for Surgical K-Wire Fixation and Trauma Procedures | High-Torque Professional Surgical Drill by OrthoPro

Professional Orthopedic Cannulated Bone Drill for Advanced Trauma Surgery

The Orthopedic Cannulated Bone Drill is a cornerstone instrument in modern orthopedic surgical suites, specifically engineered for procedures requiring the passage of guide wires or K-wires through the center of the drill. This hollow-shaft design allows for unparalleled precision during bone fixation, intramedullary nailing, and cannulated screw placement. At OrthoPro, we specialize in providing high-performance surgical power tools that meet the rigorous demands of trauma surgeons and orthopedic specialists across the globe.

In the high-stakes environment of trauma surgery, the Orthopedic Cannulated Bone Drill offers the reliability and power necessary to penetrate dense cortical bone while maintaining steady control. Our drill system is designed with a focus on ergonomics and technical excellence, ensuring that surgeons can perform delicate maneuvers with minimal fatigue. Whether used in large bone surgeries or more intricate orthopedic corrections, this cannulated bone drill delivers consistent results that enhance clinical outcomes and patient safety.

Technical Specifications and Performance Parameters

To assist hospital procurement departments and medical equipment distributors, we provide the following technical parameters for our Orthopedic Cannulated Bone Drill. These specifications ensure the device meets international medical standards for performance and safety:

• Rotational Speed: 0 – 1200 rpm (Stepless speed regulation for precise drilling control).
• Output Power: 130W high-efficiency motor designed for continuous surgical use.
• Rated Torque: > 3.3 N.m, providing ample force for dense bone penetration.
• Cannulated Diameter: 4.2mm internal hollow shaft, compatible with a wide range of surgical K-wires and guide pins.
• Noise Level: ≤ 65 dB, ensuring a quiet and focused operating room environment.
• Sterilization: Entire handpiece is fully autoclavable at 135°C (275°F) to prevent cross-contamination.
• Battery Voltage: 14.4V high-capacity rechargeable battery system for cordless mobility.
• Temperature Rise: Advanced thermal management limits surface temperature increase to ≤ 25°C during operation.

Key Features of the OrthoPro Cannulated Bone Drill

As a leading provider in the B2B medical space, OrthoPro focuses on the features that matter most to clinical professionals:

• High Concentricity: Precision engineering ensures minimal radial run-out, which is critical when drilling along a guide wire to prevent bone damage or track deviation.
• Ergonomic Handling: The balanced weight distribution and non-slip grip reduce hand strain during long and complex orthopedic procedures.
• Quick-Change Chuck: Compatible with various drill bits and reaming attachments, allowing for rapid transitions during different phases of surgery.
• Durable Construction: Built from medical-grade stainless steel and aluminum alloy, our Orthopedic Cannulated Bone Drill is designed to withstand thousands of sterilization cycles.
• Safety Protection: Integrated circuitry prevents motor overheating and protects the battery from over-discharging, extending the lifespan of the tool.

Primary Clinical Applications

The versatility of the Orthopedic Cannulated Bone Drill makes it an essential tool for several major surgical areas:

• Long Bone Fracture Fixation: Crucial for the insertion of cannulated screws in femoral neck, tibial plateau, and humeral fractures.
• Intramedullary Nailing: Provides the necessary drilling capability to prepare the medullary canal for the insertion of stabilization nails.
• Sports Medicine: Used for ligament reconstruction procedures where precise tunnel drilling over a K-wire is required.
• Pediatric Orthopedics: The ability to use guide wires makes it safer for drilling near growth plates or in smaller bone structures.

Why Partner with OrthoPro for Surgical Power Tools?

For international medical distributors and hospitals, OrthoPro is more than just a manufacturer; we are a dedicated partner in orthopedic excellence. We understand that our B2B clients require reliable supply chains, competitive wholesale pricing, and comprehensive technical support. Our Orthopedic Cannulated Bone Drill is manufactured in state-of-the-art facilities with strict quality control protocols, ensuring every unit arrives in perfect clinical condition.

We provide extensive documentation for all our products to facilitate the regulatory approval process in your region. By choosing OrthoPro, you are investing in surgical tools that offer an exceptional balance of performance, durability, and cost-effectiveness.

For bulk orders, technical inquiries, or to request a quotation, please visit our Contact Us Page or reach out directly to our international sales team at info@orthopro.mx. Our specialists are ready to provide the information you need to make an informed procurement decision.

Experience the precision and power of the Orthopedic Cannulated Bone Drill from OrthoPro and elevate the standard of care in your surgical facility.